Production and Pharmaceutical Research of Minor Saponins in Panax Notoginseng (Sanqi): Current Status and Future Prospects.

Panax notoginseng (Burk.) F.H. Chen is a traditional medicinal herb known as Sanqi or Tianqi in Asia and is commonly used worldwide. It is one of the main raw ingredients of Yunnan Baiyao, Fu fang dan shen di wan, and San qi shang yao pian. It is also a source of cardiotonic pill used to treat cardiovascular diseases in China, Korea, and Russia. Approximately 270 Panax notoginseng saponins have been isolated and identified as the major active components. Although the absorption and bioavailability of saponins are predominantly dependent on the gastrointestinal biotransformation capacity of an individual, minor saponins are better absorbed into the bloodstream and act as active substances than major saponins. Notably, minor saponins are absent or are present in minimal quantities under natural conditions. In this review, we focus on the strategies for the enrichment and production of minor saponins in P. notoginseng using physical, chemical, enzyme catalytic, and microbial methods. Moreover, pharmacological studies on minor saponins derived from P. notoginseng over the last decade are discussed. This review serves as a meaningful resource and guide, offering scholarly references for delving deeper into the exploration of the minor saponins in P. notoginseng.

Biotransformation approach to produce rare ginsenosides F1, compound Mc1, and Rd2 from major ginsenosides.

The stems and leaves of Panax notoginseng contain high saponins, but they are often discarded as agricultural waste. In this study, the predominant ginsenosides Rg1, Rc, and Rb2, presented in the stems and leaves of ginseng plants, were biotransformed into value-added rare ginsenosides F1, compound Mc1 (C-Mc1), and Rd2, respectively. A fungal strain YMS6 (Penicillium sp.) was screened from the soil as a biocatalyst with high selectivity for the deglycosylation of major ginsenosides. Under the optimal fermentation conditions, the yields of F1, C-Mc1, and Rd2 were 97.95, 68.64, and 79.58%, respectively. This study provides a new microbial resource for the selective conversion of protopanaxadiol-type and protopanaxatriol-type major saponins into rare ginsenosides via the whole-cell biotransformation and offers a solution for the better utilization of P. notoginseng waste.

Biotransformation of Sclareol by a Fungal Endophyte of Salvia sclarea.

Microbial endophytes are known as versatile producers of useful metabolites, which have extensive applications in pharmacy, fragrance, agriculture and food. This study aims to screen sclareol-biotransforming microorganisms from Salvia sclarea, an untapped source of diverse endophytes. In this study, 50 culturable endophytes were isolated from S. sclarea grown in Xinjiang using sclareol as the sole carbon source and screened for their potential to transform sclareol into analogues. A fungal endophyte, identified as the generally recognized as safe (GRAS) strain Aspergillus tubingensis, can produce labd-14-ene-3ß,8α,13ß-triol and 8α,13ß-dihydroxylabd-14-en-3-one from sclareol, involving hydroxylation and carbonylation at the C3 site. Structures of the two metabolites were elucidated by HR-ESI-MS and NMR analysis. S. sclarea was proven to be a good source of endophytes that are prospective producers of secondary metabolites with valuable chemical and biological properties. This study is the first report regarding the isolation of endophytes from S. sclarea.

Efficient biosynthesis of resveratrol via combining phenylalanine and tyrosine pathways in Saccharomyces cerevisiae.

BACKGROUND: Resveratrol is a commercially available stilbenoid widely used as dietary supplements, functional food ingredients, and cosmetic ingredients due to its diverse physiological activities. The production of resveratrol in microorganisms provides an ideal source that reduces the cost of resveratrol, but the titer in Saccharomyces cerevisiae was still much lower than that in other hosts. RESULTS: To achieve enhanced production of resveratrol in S. cerevisiae, we constructed a biosynthetic pathway via combining phenylalanine and tyrosine pathways by introducing a bi-functional phenylalanine/tyrosine ammonia lyase from Rhodotorula toruloides. The combination of phenylalanine pathway with tyrosine pathway led to a 462% improvement of resveratrol production in yeast extract peptone dextrose (YPD) medium with 4% glucose, suggesting an alternative strategy for producing p-coumaric acid-derived compounds. Then the strains were further modified by integrating multi-copy biosynthetic pathway genes, improving metabolic flux to aromatic amino acids and malonyl-CoA, and deleting by-pathway genes, which resulted in 1155.0 mg/L resveratrol in shake flasks when cultured in YPD medium. Finally, a non-auxotrophic strain was tailored for resveratrol production in minimal medium without exogenous amino acid addition, and the highest resveratrol titer (4.1 g/L) ever reported was achieved in S. cerevisiae to our knowledge. CONCLUSIONS: This study demonstrates the advantage of employing a bi-functional phenylalanine/tyrosine ammonia lyase in the biosynthetic pathway of resveratrol, suggesting an effective alternative in the production of p-coumaric acid-derived compounds. Moreover, the enhanced production of resveratrol in S. cerevisiae lays a foundation for constructing cell factories for various stilbenoids.

Metabolic Engineering of Escherichia coli for High-Level Production of (R)-Acetoin from Low-Cost Raw Materials.

Acetoin is an important four-carbon platform chemical with versatile applications. Optically pure (R)-acetoin is more valuable than the racemate as it can be applied in the asymmetric synthesis of optically active α-hydroxy ketone derivatives, pharmaceuticals, and liquid crystal composites. As a cytotoxic solvent, acetoin at high concentrations severely limits culture performance and impedes the acetoin yield of cell factories. In this study, putative genes that may improve the resistance to acetoin for Escherichia coli were screened. To obtain a high-producing strain, the identified acetoin-resistance gene was overexpressed, and the synthetic pathway of (R)-acetoin was strengthened by optimizing the copy number of the key genes. The engineered E. coli strain GXASR-49RSF produced 81.62 g/L (R)-acetoin with an enantiomeric purity of 96.5% in the fed-batch fermentation using non-food raw materials in a 3-L fermenter. Combining the systematic approach developed in this study with the use of low-cost feedstock showed great potential for (R)-acetoin production via this cost-effective biotechnological process.

High-yield production of protopanaxadiol from sugarcane molasses by metabolically engineered Saccharomyces cerevisiae.

BACKGROUND: Ginsenosides are Panax plant-derived triterpenoid with wide applications in cardiovascular protection and immunity-boosting. However, the saponins content of Panax plants is fairly low, making it time-consuming and unsustainable by direct extraction. Protopanaxadiol (PPD) is a common precursor of dammarane-type saponins, and its sufficient supply is necessary for the efficient synthesis of ginsenoside. RESULTS: In this study, a combinational strategy was used for the construction of an efficient yeast cell factory for PPD production. Firstly, a PPD-producing strain was successfully constructed by modular engineering in Saccharomyces cerevisiae BY4742 at the multi-copy sites. Then, the INO2 gene, encoding a transcriptional activator of the phospholipid biosynthesis, was fine-tuned to promote the endoplasmic reticulum (ER) proliferation and improve the catalytic efficiency of ER-localized enzymes. To increase the metabolic flux of PPD, dynamic control, based on a carbon-source regulated promoter PHXT1, was introduced to repress the competition of sterols. Furthermore, the global transcription factor UPC2-1 was introduced to sterol homeostasis and up-regulate the MVA pathway, and the resulting strain BY-V achieved a PPD production of 78.13 ± 0.38 mg/g DCW (563.60 ± 1.65 mg/L). Finally, sugarcane molasses was used as an inexpensive substrate for the first time in PPD synthesis. The PPD titers reached 1.55 ± 0.02 and 15.88 ± 0.65 g/L in shake flasks and a 5-L bioreactor, respectively. To the best of our knowledge, these results were new records on PPD production. CONCLUSION: The high-level of PPD production in this study and the successful comprehensive utilization of low-cost carbon source -sugarcane molassesindicate that the constructed yeast cell factory is an excellent candidate strain for the production of high-value-added PPD and its derivativeswith great industrial potential.

Probing the Biotransformation Process of Sclareol by Resting Cells of Hyphozyma roseonigra.

Sclareol glycol is a key starting material with significant market interest for synthesizing high-value ambroxide, a sustainable substitute for ambergris in high-end fragrances. Sclareol glycol can be obtained by biotransformation of sclareol, a labdane-type diterpene, using Hyphozyma roseonigra. However, the pathway and mechanism of sclareol glycol biosynthesis remain unclear. In this study, the dynamic time course of sclareol biotransformation was explored by resting cell assays and several intermediates produced during biotransformation were detected. The results show that (1) sclareol glycol and sclareolide are not interconverted and are potentially synthesized via different metabolic pathways and (2) several putative intermediates resulting from biotransformation are featured with a labdane carbon backbone, including isomerized and oxidized analogues. A plausible transformation pathway of sclareol in H. roseonigra was proposed based on detected metabolites. This study sheds light on the biosynthetic mechanism of sclareol glycol and paves a way for the future biotechnological production of this promising compound.

De Novo Biosynthesis of D-p-Hydroxyphenylglycine by a Designed Cofactor Self-Sufficient Route and Co-culture Strategy.

d-p-Hydroxyphenylglycine (D-HPG) is an important intermediate for the synthesis of ß-lactam antibiotics with an annual market demand of thousands of tons. Currently, the main production processes are via chemical approaches. Although enzymatic conversion has been investigated for D-HPG production, synthesis of the substrate DL-hydroxyphenylhydantoin is still chemically based, which suffers from high pollution and harsh reaction conditions. In this study, one cofactor self-sufficient route for D-HPG production from l-phenylalanine was newly designed and the artificial pathway was functionalized by selecting suitable enzymes and adjusting their expressions in strain Pseudomonas putida KT2440. Notably, a new R-mandelate dehydrogenase from Lactococcus lactis with relatively high activity under pH neutral conditions was successfully mined to demonstrate the biosynthetic pathway in vivo. The performance of the engineered P. putida strain was further increased by enhancing cellular NAD availability and blocking l-phenylalanine consumption. Coupled with the l-phenylalanine producer, Escherichia coli strain ATCC 31884, a stable and interactive co-culture process was also developed by engineering a "cross-link auxotrophic" system to produce D-HPG directly from glucose. Thus, this study is the first approach for the de novo biosynthesis of D-HPG by engineering a non-natural pathway and lays the foundation for further improving the efficiency of D-HPG production via a green and sustainable route.

Characterization of a Group of UDP-Glycosyltransferases Involved in the Biosynthesis of Triterpenoid Saponins of Panax notoginseng.

UDP-glycosyltransferase (UGT)-mediated glycosylation is a common modification in triterpene saponins, which exhibit a wide range of bioactivities and important pharmacological effects. However, few UGTs involved in saponin biosynthesis have been identified, limiting the biosynthesis of saponins. In this study, an efficient heterologous expression system was established for evaluating the UGT-mediated glycosylation process of triterpene saponins. Six UGTs (UGTPn17, UGTPn42, UGTPn35, UGTPn87, UGTPn19, and UGTPn12) from Panax notoginseng were predicted and found to be responsible for efficient and direct enzymatic biotransformation of 21 triterpenoid saponins via 26 various glycosylation reactions. Among them, UGTPn87 exhibited promiscuous sugar-donor specificity of UDP-glucose (UDP-Glc) and UDP-xylose (UDP-Xyl) by catalyzing the elongation of the second sugar chain at the C3 or/and C20 sites of protopanaxadiol-type saponins with a UDP-Glc or UDP-Xyl donor, as well as at the C20 site of protopanaxadiol-type saponins with a UDP-Glc donor. Two new saponins, Fd-Xyl and Fe-Xyl, were generated by catalyzing the C3-O-Glc xylosylations of notoginsenoside Fd and notoginsenoside Fe when incubated with UGTPn87. Moreover, the complete biosynthetic pathways of 17 saponins were elucidated, among which notoginsenoside L, vinaginsenoside R16, gypenoside LXXV, and gypenoside XVII were revealed in Panax for the first time. A yeast cell factory was constructed with a yield of Rh2 at 354.69 mg/L and a glycosylation ratio of 60.40% in flasks. Our results reveal the biosynthetic pathway of a group of saponins in P. notoginseng and provide a theoretical basis for producing rare and valuable saponins, promoting their industrial application in medicine and functional foods.

De Novo Biosynthesis of Polydatin in Saccharomyces cerevisiae.

Polydatin, with better structural stability and biological activities than resveratrol, is mainly extracted from the traditional Chinese medicinal plant Polygonum cuspidatum. In this study, based on the transcriptome analysis of P. cuspidatum, we identified the key glycosyltransferase of resveratrol and achieved the biosynthesis of polydatin from glucose by incorporation with the resveratrol biosynthesis module, UDP-glucose supply module, and glycosyltransferase expression module. Through metabolic engineering and fermentation optimization, the production of polydatin reached 545 mg/L, and the dry cell weight was 27.83 mg/g DCW, which was about twice that of extracted from the P. cuspidatum root (11.404 mg/g DCW). Therefore, it is possible to replace the production mode of polydatin from plant extraction to microbial chassis in the future.

A Green Route for High-Yield Production of Tetramethylpyrazine From Non-Food Raw Materials.

2,3,5,6-Tetramethylpyrazine (TMP) is an active pharmaceutical ingredient originally isolated from Ligusticum wallichii for curing cardiovascular and cerebrovascular diseases and is widely used as a popular flavoring additive in the food industry. Hence, there is a great interest in developing new strategies to produce this high-value compound in an ecological and economical way. Herein, a cost-competitive combinational approach was proposed to accomplish green and high-efficiency production of TMP. First, microbial cell factories were constructed to produce acetoin (3-hydroxy-2-butanone, AC), an endogenous precursor of TMP, by introducing a biosynthesis pathway coupled with an intracellular NAD+ regeneration system to the wild-type Escherichia coli. To further improve the production of (R)-AC, the metabolic pathways of by-products were impaired or blocked stepwise by gene manipulation, resulting in 40.84 g/L (R)-AC with a high optical purity of 99.42% in shake flasks. Thereafter, an optimal strain designated GXASR11 was used to convert the hydrolysates of inexpensive feedstocks into (R)-AC and achieved a titer of 86.04 g/L within 48 h in a 5-L fermenter under optimized fermentation conditions. To the best of our knowledge, this is the highest (R)-AC production with high optical purity (≥98%) produced from non-food raw materials using recombinant E. coli. The supernatant of fermentation broth was mixed with diammonium phosphate (DAP) to make a total volume of 20 ml and transferred to a high-pressure microreactor. Finally, 56.72 g/L TMP was obtained in 3 h via the condensation reaction with a high conversion rate (85.30%) under optimal reaction conditions. These results demonstrated a green and sustainable approach to efficiently produce high-valued TMP, which realized value addition of low-cost renewables.

Biological Production of (S)-acetoin: A State-of-the-Art Review.

Acetoin is an important four-carbon compound that has many applications in foods, chemical synthesis, cosmetics, cigarettes, soaps, and detergents. Its stereoisomer (S)-acetoin, a high-value chiral compound, can also be used to synthesize optically active drugs, which could enhance targeting properties and reduce side effects. Recently, considerable progress has been made in the development of biotechnological routes for (S)-acetoin production. In this review, various strategies for biological (S)- acetoin production are summarized, and their constraints and possible solutions are described. Furthermore, future prospects of biological production of (S)-acetoin are discussed.

Simulated Protein Thermal Detection (SPTD) for Enzyme Thermostability Study and an Application Example for Pullulanase from Bacillus deramificans.

BACKGROUND: The relationship between protein structure and its bioactivity is one of the fundamental problems for protein engineering and pharmaceutical design. METHOD: A new method, called SPTD (Simulated Protein Thermal Detection), was proposed for studying and improving the thermal stability of enzymes. The method was based on the evidence observed by conducting the MD (Molecular Dynamics) simulation for all the atoms of an enzyme vibrating from the velocity at a room temperature (e.g., 25°C) to the desired working temperature (e.g., 65°C). According to the recorded MD trajectories and the coordinate deviations of the constituent residues under the two different temperatures, some new strategies have been found that are useful for both drug delivery and starch industry. CONCLUSION: The SPTD technique presented in this paper may become a very useful tool for pharmaceutical design and protein engineering.

Fabrication and Characterization of Graphene Microcrystal Prepared from Lignin Refined from Sugarcane Bagasse.

Graphene microcrystal (GMC) is a type of glassy carbon fabricated from lignin, in which the microcrystals of graphene are chemically bonded by sp³ carbon atoms, forming a glass-like microcrystal structure. The lignin is refined from sugarcane bagasse using an ethanol-based organosolv technique which is used for the fabrication of GMC by two technical schemes: The pyrolysis reaction of lignin in a tubular furnace at atmospheric pressure; and the hydrothermal carbonization (HTC) of lignin at lower temperature, followed by pyrolysis at higher temperature. The existence of graphene nanofragments in GMC is proven by Raman spectra and XRD patterns; the ratio of sp² carbon atoms to sp³ carbon atoms is demonstrated by XPS spectra; and the microcrystal structure is observed in the high-resolution transmission electron microscope (HRTEM) images. Temperature and pressure have an important impact on the quality of GMC samples. With the elevation of temperature, the fraction of carbon increases, while the fraction of oxygen decreases, and the ratio of sp² to sp³ carbon atoms increases. In contrast to the pyrolysis techniques, the HTC technique needs lower temperatures because of the high vapor pressure of water. In general, with the help of biorefinery, the biomass material, lignin, is found to be qualified and sustainable material for the manufacture of GMC. Lignin acts as a renewable substitute for the traditional raw materials of glassy carbon, copolymer resins of phenol formaldehyde, and furfuryl alcohol-phenol.

A comparative study for the organic byproducts from hydrothermal carbonizations of sugarcane bagasse and its bio-refined components cellulose and lignin.

Sugarcane bagasse was refined into cellulose, hemicellulose, and lignin using an ethanol-based organosolv technique. The hydrothermal carbonization (HTC) reactions were applied for bagasse and its two components cellulose and lignin. Based on GC-MS analysis, 32 (13+19) organic byproducts were derived from cellulose and lignin, more than the 22 byproducts from bagasse. Particularly, more valuable catechol products were obtained from lignin with 56.8% share in the total GC-MS integral area, much higher than the 2.263% share in the GC-MS integral areas of bagasse. The organic byproducts from lignin make up more than half of the total mass of lignin, indicating that lignin is a chemical treasure storage. In general, bio-refinery and HTC are two effective techniques for the valorization of bagasse and other biomass materials from agriculture and forest industry. HTC could convert the inferior biomass to superior biofuel with higher energy quantity of combustion, at the same time many valuable organic byproducts are produced. Bio-refinery could promote the HTC reaction of biomass more effective. With the help of bio-refinery and HTC, bagasse and other biomass materials are not only the sustainable energy resource, but also the renewable and environment friendly chemical materials, the best alternatives for petroleum, coal and natural gas.

Enhanced production of optical (S)-acetoin by a recombinant Escherichia coli whole-cell biocatalyst with NADH regeneration.

Acetoin is an important platform chemical with a variety of applications in foods, cosmetics, chemical synthesis, and especially in the asymmetric synthesis of optically active pharmaceuticals. It is also a useful breath biomarker for early lung cancer diagnosis. In order to enhance production of optical (S)-acetoin and facilitate this building block for a series of chiral pharmaceuticals derivatives, we have developed a systematic approach using in situ-NADH regeneration systems and promising diacetyl reductase. Under optimal conditions, we have obtained 52.9 g L-1 of (S)-acetoin with an enantiomeric purity of 99.5% and a productivity of 6.2 g (L h)-1. The results reported in this study demonstrated that the production of (S)-acetoin could be effectively improved through the engineering of cofactor regeneration with promising diacetyl reductase. The systematic approach developed in this study could also be applied to synthesize other optically active α-hydroxy ketones, which may provide valuable benefits for the study of drug development.

2L-PCA: a two-level principal component analyzer for quantitative drug design and its applications.

A two-level principal component predictor (2L-PCA) was proposed based on the principal component analysis (PCA) approach. It can be used to quantitatively analyze various compounds and peptides about their functions or potentials to become useful drugs. One level is for dealing with the physicochemical properties of drug molecules, while the other level is for dealing with their structural fragments. The predictor has the self-learning and feedback features to automatically improve its accuracy. It is anticipated that 2L-PCA will become a very useful tool for timely providing various useful clues during the process of drug development.

Microbial Routes to (2R,3R)-2,3-Butanediol: Recent Advances and Future Prospects.

(2R,3R)-2,3-Butanediol has many industrial applications, such as it is used as an antifreeze agent and low freezing point fuel. In addition, it is particularly important to provide chiral groups in drugs. In recent years, this valuable bio-based chemical has attracted increasing attention, and significant progress has been made in the development of microbial cell factories for (2R,3R)-2,3-butanediol production. This article reviews recent advances and challenges in microbial routes to (2R,3R)-2,3- butanediol production, and highlights the metabolic engineering and synthetic biological approaches used to improve titers, yields, productivities, and optical purities. Finally, a systematic and integrative strategy for developing high-performance microbial cell factories is proposed.

The Intrinsic Relationship Between Structure and Function of the Sialyltransferase ST8Sia Family Members.

As a subset of glycosyltransferases, the family of sialyltransferases catalyze transfer of sialic acid (Sia) residues to terminal non-reducing positions on oligosaccharide chains of glycoproteins and glycolipids, utilizing CMP-Neu5Ac as the activated sugar nucleotide donor. In the four known sialyltransferase families (ST3Gal, ST6Gal, ST6GalNAc and ST8Sia), the ST8Sia family catalyzes synthesis of α2, 8-linked sialic/polysialic acid (polySia) chains according to their acceptor specificity. We have determined the 3D structural models of the ST8Sia family members, designated ST8Sia I (1), II(2), IV(4), V(5), and VI(6) using the Phyre2 server. Accuracy of these predicted models are based on the ST8Sia III crystal structure as the calculated template. The common structural features of these models are: (1) Their parallel templates and disulfide bonds are buried within the enzymes and are predominately surrounded by helices; (2) The anti-parallel ß-sheets are located at the N-terminal region of the enzymes; (3) The mono-sialytransferases (mono-STs), ST8Sia I and ST8Sia VI, contain only a single pair of disulfide bonds, and there are no anti-parallel ß-sheets in ST8Sia VI; (4) The Nterminal region of all of the mono-STs are located some distant away from their core structure; (5) These conformational features show that the 3D structures of the mono-STs are less compact than the two polySTs, ST8Sia II and ST8Sia IV, and the oligo-ST, ST8Sia III. These structural features relate to the catalytic specificity of the monoSTs; (6) In contrast, the more compact structural features of ST8Sia II, ST8Sia IV and ST8Sia III relate to their ability to catalyze the processive synthesis of oligo- (ST8Sia III) and polySia chains (ST8Sia II & ST8Sia IV); (7) Although ST8Sia II, III and IV have similar conformations in their corresponding polysialyltransferase domain (PSTD) and polybasic region (PBR) motifs, the structure of ST8Sia III is less compact than ST8Sia II and ST8Sia IV, and the amino acid components of the several three-residue-loops in the two motifs of ST8Sia III are different from that in ST8Sia II and ST8Sia IV. This is likely the structural basis for why ST8Sia III is an oligoST and not able to polysialylate and; (8) In contrast, essentially all amino acids within the threeresidue- loops in the PSTD of ST8Sia II and ST8Sia IV are highly conserved, and many amino acids in the loops and the helices of these two motifs are critical for NCAM polysialylation, as determined by mutational analysis and confirmed by our recent NMR results. In summary, these new findings provide further insights into the molecular mechanisms underlying polyST-NCAM recognition, polySTpolySia/ oligoSia interactions, and polysialylation of NCAM.

Exploring the possibility to store the mixed oxygen-hydrogen cluster in clathrate hydrate in molar ratio 1:2 (O2+2H2).

An interesting possibility is explored: storing the mixture of oxygen and hydrogen in clathrate hydrate in molar ratio 1:2. The interaction energies between oxygen, hydrogen, and clathrate hydrate are calculated using high level quantum chemical methods. The useful conclusion points from this study are summarized as follows. (1) The interaction energies of oxygen-hydrogen mixed cluster are larger than the energies of pure hydrogen molecular cluster. (2) The affinity of oxygen molecules with water molecules is larger than that of the hydrogen molecules with water molecules. (3) The dimension of O2-2H2 interaction structure is smaller than the dimension of CO2-2H2 interaction structure. (4) The escaping energy of oxygen molecules from the hydrate cell is larger than that of the hydrogen molecules. (5) The high affinity of the oxygen molecules with both the water molecules and the hydrogen molecules may promote the stability of oxygen-hydrogen mixture in the clathrate hydrate. Therefore it is possible to store the mixed (O2+2H2) cluster in clathrate hydrate.